Article Index
Exterior Parts Buyer's Guide - 2010
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
All Pages

 

Page 6

 

Dry_Carbon_Fiber_Wide_Front_Fenders

Password:JDM
Dry Carbon Fiber Wide Front Fenders

www.passwordjdm.com

Extended a full 38mm, and much lighter than stock, the PWJDM wide front fenders were designed to accommodate a 20x11 wheel wrapped in 315/30/20 Toyo R888. These are the widest tires available for the rear of a stock GT-R. Being an AWD car, it’s only fitting that the same tires are on all four corners. With these PWJDM GT-R wide front fenders, the goal has been achieved. You can easily push that corner that much faster when you know your car will be able to handle it. Getting wider fenders to accommodate wider tires are a must if you seriously drive your GT-R to the limit


Dry_Carbon_Fiber_Street_Canards

Password:JDM
Dry Carbon Fiber Street Canards

www.passwordjdm.com

Set at 22.5 degrees of rake, the Password:JDM dry carbon street canards will generate 43lbs of downforce per side in the frontal corners starting at 40mph. That is 86lbs of downforce up front without the use of any additional splitters... with the use of a functional front splitter, you can balance the amount of downforce required as per your setup and application per race track.
VIS_Racing_Carbon_Fiber_Hoods

 

VIS Racing
Carbon Fiber Hoods

www.visracing.com

VIS carbon fiber hoods are made from the finest carbon fiber available. This carbon fiber material meets all ISO Standards. ViS carbon fiber hoods are Grade “A” quality. Each hood is inspected by our quality control department before leaving our facility to ensure the highest standard of quality and live up to our reputation in surpassing all other hoods alike. VIS carbon fiber hoods are manufactured using a two piece construction – a carbon fiber topside with a black gloss, fiberglass, one piece underside to optimize structural integrity. All of our hoods have rolled edges and are protected with a UV coating which allows the hood to maintain its high gloss finish. The result; a hood that excels above the rest in quality and performance. All VIS carbon fiber hoods come with a VIS Authenticity badge so be sure to look out for this when purchasing any carbon fiber hoods


Stillen_Front_Lip_Spoiler

Stillen
Front Lip Spoiler

www.stillen.com

Utilizing Steve Millen’s expansive racing heritage, Stillen is proud to release functional high quality urethane front lip spoiler for the Nissan GT-R R35. The Stillen Urethane Lip Spoiler adds 2 inches of length to the OEM fascia, and installs directly onto the vehicle over the factory piece. This lip spoiler is designed to hold additional air onto the nose, with flares on the side corners producing a canard effect for extra control. Constructed out of high-quality polyurethane, this front spoiler is nearly indestructible and carries a limited lifetime warranty. This means it can stand up to the hazards of the race track or the drive around town.

 

Read on for More Products



MagnaFlow's NEW Cat-Back for the 2015 Volkswagen GTI MK7 L4 2.0L

MagnaFlow introduces a stainless cat-back performance exhaust system for the 2015 Volkswagen Golf GTI Mk7. Part No:15357 Description:Material: 100% Stainless SteelTubing O.D. Size: 3in.System Type: Cat-BackTIP O.D. Size: 4in.TIP Quantity: 2Single/Dual: DualExit Position: DUAL SPLIT…
Read More

Lucas Oil Octane Booster

A genuine performance enhancer, Lucas Oil’s Octane Booster is their famous Fuel Treatment with octane boosters, tested and proven to deliver at least three times more boost than most other brands. Suitable for fuel-injected, carbureted,…
Read More

Neo-motorsport Coil-Over Install

The Scion FR-S offers a true sportscar experience at a very affordable price point and is complimented by aggressive styling. For those looking to enhance and tighten up the handling of this coupe, there are…
Read More