Article Index
Rock Out
Page 2
All Pages

 

With aspirations of building a Time Attack car, Lee started with the 2.4L world engine. The turbo was upgraded with an ATP Garrett GT3076R regulated by a TiAL 38mm wastegate. Air is pulled through a custom short ram intake into JMB intercooler piping and an MPx 62mm throttle body attached to a Form & Function manifold.

If the enthusiast culture demands it, it will come to market. Since the 1950’s, automotive designers have been following the trends put forth by the aftermarket and car customizers. Trends like quad headlights, louvers and hood scoops are all trends the American car companies lifted from the innovators at street level. Dodge, was no stranger to this approach and took one of their lowly commuters and turned it into an import slayer.

After a six year build-up, what we have here is possibly the craziest example of an SRT-4 we’ve ever featured!

There were already tuners out there who had swapped the Mitsubishi 4G63 turbo mill from DSMs into a few Dodge Neons. The ultimate sleeper already ran a Mitsu engine, the 420A, which was the non-turbo equivalent. Dodge decided they would trump the efforts of aftermerket enthusiasts and come out with a seriously underrated 2.4L turbo and back it with all kinds of big power Mopar upgrades!

Although, it was clear Dodge arrived late to the Sport Compact party, the Dodge SRT-4 is alive and well. After a six year build-up, what we have here is possibly the craziest example of an SRT-4 we’ve ever featured!

Owner Kenny Lee of Buena Park, CA knew long ago this would be a keeper for him. “When I was first looking at cars to buy, I ended up narrowing my choices down to the Acura RSX Type-S and the Dodge SRT-4,” says Lee. “The moment I took a test drive in the SRT-4 at a dealership I was hooked and consequently picked up the car the very same day.”

With aspirations of building a Time Attack car, Lee started with the 2.4L world engine. The turbo was upgraded with an ATP Garrett GT3076R regulated
by a TiAL 38mm wastegate. Air is pulled through a custom short ram intake into JMB intercooler piping and an MPx 62mm throttle body attached to a Form & Function manifold. The fueling got a boost with an walbro 255lph pump along with a Aeromotive a1000 fuel pressure regulator, overcome billet rail and a quartet of Deatsch Werks 750cc injectors.82b9c5a_opt

With a Mopar Stage I PCM and A’PEXi S-AFC to trim the fuel, the boost is regulated by an A’PEXi AVC-R. When this SRT-4 was at the dyno, it was just shy of 400 ponies, laying down 392whp with 380lb-ft. The new jam meant the experts at ACT had to step in to beef up the driveline. With an ACT Sprung 6-Puck Clutch, HD pressure plate and ACT Streetlite X-ACT flywheel, Lee isn’t going to have
to worry about the driveline anymore.

Lee knew that with the new found power, the suspension and brakes needed to be addressed. He turned to KW Suspension for a custom set of coilovers along with helper springs for a smooth ride. Hotchkis sway bars were added front and rear as were DC Sports strut tower bars. Some GLH custom front control arms and Manny Z rear lateral links were also added. The upgraded brake kit was put together by TCE Performance using Wilwood products. The outside of the car got a boost thanks to trusted team at AIT Racing in SoCal. The AIT Racing widebody kit was fitted up by Auto Explosion. The AIT kit consists of a front bumper, rear bumper, wider fenders and sideskirts. The carbon fiber onboard is from Carbon by Design (B-pillar and trunk) while the hood is by Kaminari and APR Performance GTC-300 wing. Finally the car was shot in Lambo Monterey Blue by Auto Explosion with a matching cage painted by Martini Motorsports.

It was then time to fit up some rollers to the project. Since the car was dramatically wider, some serious wheels were selected in 18x10-inch on all four corners. The Advan T7s are wrapped in matching Yokohama Advan Neova AD07s in 285/35R18. Inside, Lee did not let up on his pursuit of the most outrageous SRT-4 on the planet. The entire interior is surrounded by a custom, color-matched 8-point cage by L-CON.

 

ac10089_opt 03f2845_opt ec471a8_opt

Read on for Full Specs

 



More Vehicle Features

Tuner Battlegrounds Championship 2017: Recap Of The Competition At The Big Show

Five years of Tuner Battlegrounds. That's such a mind-blowing sentence to be able to say. Five whole years of enthusiasts showcasing their builds through our competition for the chance to be on the cover of PASMAG and experience having their…
Read More

Dennis Wang's 2006 BMW 330i

The debate between NA and forced induction is something that will never die. It’s fair to say if you want power you go forced, if you want response you go NA. If you want big power with response you get…
Read More

Goldzilla: Kuhl Racing & ARTIS 2012 Nissan GT-R

Pushing the envelope in the automotive aftermarket of today’s world requires some outside-the-box thinking, especially if you want to make a breakthrough in style. These breakthroughs are often surrounded by controversy, which can help the project garner attention and go…
Read More

Tiny Terror: 2012 Scion iQ

Over the past year, you’ve probably noticed the little Scion iQ project car that we’ve diligently been working on and tracking within these very pages. If you haven’t you should definitely check it out. But all good things must come…
Read More

One Classy Chassy VIP: 2003 Lexus SC430

Written by Terence Gamble | Photos by Terence Gamble William Chau's VIP'ed out soarer flys high and scrapes low This Lexus SC430 luxury convertible was purchased by William Chau in 2006. Chau originally bought the car with no intention to…
Read More