Article Index
SEMA 2011: Hot New Products
Page 2
Page 3
Page 4
Page 5
All Pages

SEMA Hot New Products 2011

SPC Products

Adjustable Rear & Camber Arm and Toe Kit

 

The innovative adjustable rear control arm and offset toe bushing kit for Subaru WRX, Impreza, and STI utilizes SPC’s patent pending cam nut design to easily set and lock in rear camber adjustment. The camber arm will provide ±3? of change. The included offset toe bushing provides a fixed 1.5? of offset allowing you to get back to spec for changes of up to ±2? when used in combination with the OE slot.

 

NOTE: To maximize the adjustable arms change ability to ±3?, purchase the SPC adjustable toe arm #67655, it will provide toe change of ±3? to match the change provided by the camber arm in extreme applications and for easy track tuning.

 

For more visit www.specprod.com

SEMA Hot New Products 2011

Aeromotive Inc

In-tank Stealth Fuel Systems

 

Aeromotive has your solution. Similar to the successful Corvette Stealth System, the new Camaro System is a complete drop-in single fuel pump assembly for 2010 and later Camaros. The system provides a single A1000 or Eliminator Fuel Pump capable of supporting big HP. The best part, it drops right into your factory tank. It still incorporates the factory jet siphon system, includes an integral 100 micron pre-pump filter and an ORB-08 return line port. Now you can plumb a true return-style system into your Camaro to support the power you’re making without the worry of the siphon system, all while maintaining the factory fuel tank and saving you money.

 

For more visit www.aeromotiveinc.com

SEMA Hot New Products 2011

AEM

Ford Fiesta Intake System

After installing the AEM intake system, this playful Fiesta is transformed into an intense street machine. By replacing the factory airbox design with an AEM mandrel-bent two-piece cold air intake system, the 2012 Fiesta gains an additional 11 horsepower and 15 ft. lbs. of torque right in the meat of the power curve, where it counts! The Dryflow® Air Filter initiates the boost in power gains and includes an extra bonus; easy cleaning. AEM’s Dryflow® filter is free of oil and offers simple cleaning solutions including the ability speed up the drying process by using compressed air. Gunmetal gray or polished vacuum metalized finishes offer a sleek under the hood appearance and are also easy to maintain.

 

For more visitwww.aemintake.com

SEMA Hot New Products 2011

AMSOIL

Engine Assembly Lube

AMSOIL Engine Assembly Lube is formulated to cling to engine parts and provide exceptional wear protection, while inhibiting rust or corrosion on newly built or rebuilt four-stroke engines. Designed to dissolve in oil, it helps eliminate oil port clogging and deposit formation for added protection. Featuring a high-viscosity base oil and unique tackifier, it provides a long-lasting, tenacious cling on critical engine parts that may sit for long periods of time. Recommended for any
new or rebuilt four-stroke engine including racing and performance applications, it’s available in convenient 4-oz. tubes for clean and precise application.

 

For more visit www.amsoil.com

 



Project V8 RX-7: Part VI - Installing the E-Rod LS3

In our last installment of Project V8 RX-7 we took a look at the T-56 Magnum transmission from Tremec we’ll be using for our swap, now it’s time to bolt it up to our E-ROD…
Read More

Bulletproof x Willians FIA 4-point Racing Harness

Bulletproof approached Willans to produce the ultimate street & track racing harness for the most discerning drivers. The specifications demanded of this project are identical to the specs found in the Willans produced Nismo racing…
Read More

Falken Introduces Espia EPZ Winter Performance Tire

FONTANA, CA (August 26, 2010) – Falken Tire, a leader in high performance tire technology, introduces a new winter season tire, the ESPIA EPZ, designed to tackle the stubbornness of snow and challenges of ice…
Read More