Article Index
Horsing Around: 2013 Ford Mustang GT RTR
Page 2
All Pages

Horsing Around: 2013 Ford Mustang GT RTR

Justin Pawlak has been a force in the 2012 Formula D season and his custom wild, bucking Mustang is a major reason why.

Team Falken Tire has been racking up quite the trophy case in the Formula Drift series. Between its all-star lineup of drivers it has achieved more overall wins than any other team in the past two years, largely as a result of signing Justin “JTP” Pawlak. This season (2012) marks his third year with the team and things have really kicked into high gear. Pawlak dominated the first two events of the FD season and managed to take the runner-up spot in round three, showing his run at the championship in 2011 was no fluke.

His success can be linked to his undeniable skill behind the wheel and the muscle car you see here: the 2013 Falken Tire Ford Mustang RTR. Talent cannot be explained in a few pages of a glossy print magazine, but we'll try to break down a few of the secrets behind his ride.

On the surface, its teal and blue paint scheme is both familiar and exciting, bringing back memories of teammate Vaughn Gittin Jr.'s many victories. Look closer and you can spot the LED exterior lamps are all-new for this season and nearly all of the car's body panels are actually made from dry carbon fiber to keep the weight down. Autosport Dynamics (ASD), the fabrication house behind the build, created all of the panels from scratch and the result of this intense diet plan has helped realize a savings of nearly 600 pounds versus stock chassis to put Pawlak's car squarely into Formula D's 3,000 to 3,099 pound weight class. The aerodynamics have also been tweaked with a few RTR parts, namely a front chin spoiler, side skirts and a trunk lid spoiler to put a bit more downforce on the rear rubber.

Horsing Around: 2013 Ford Mustang GT RTR

Horsing Around: 2013 Ford Mustang GT RTR Horsing Around: 2013 Ford Mustang GT RTR Horsing Around: 2013 Ford Mustang GT RTR

As for tires, Pawlak's car wouldn't be a part of the Falken squad without a set of the company's best. They have matched up the Falken AZENIS RT-615K, a street-legal competition tire compound, against 18-inch HRE C21 three-piece forged racing wheels. Gittin Jr. and Daijiro Yoshihara both won championships driving on the RT-615K, so to say these are race-proven tires is a bit of an understatement.

Beating at the heart of this thoroughbred is a Ford Racing 410 cubic-inch V8 engine built by Roush Yates. It's the same configuration found in a World of Outlaws Sprint Car with some minor tweaks by ASD. First, there's a set of K&N air filters on top of the Kinsler ITBs, a Kooks header and custom four-inch ASD exhaust handles the breathing side of things while a MoTeC M800 ECU governs the fuel injection and ignition timing. The result is a mind-numbing 845 horsepower and 632 lb-ft of torque, capable of revving all the way up to 8300 rpm.

Pawlak takes shifting duty personally, gunning through the four-speed dog box transmission while the power is sent back to ASD's specially designed live rear axle. Finally, the radiator has been moved to the back of the car and the area that once allowed rear passengers to tag along is now occupied by six fan-driven ducts that feed air to the massive cooling unit from the roof and rear quarter windows.

Stopping duty is left in the capable claws of some custom-built Wilwood brakes just for this application. Six-piston calipers hug the front brakes while dual two-piston calipers take care of matters in the rear, one of which is designated just for the handbrake. The suspension is comprised of Tein competition dampers that are also fabricated to ASD's specification with a remote control unit mounted into the dashboard.

Horsing Around: 2013 Ford Mustang GT RTR

Inside, Pawlak's office is graced with Sparco's Pro 2000 bucket racing seats and harnesses along with a Sparco steering wheel. The traditional gauges have been removed in favor of a MoTeC Sport Dash Logger (SDL), a single display that can be programmed for numerous readouts. In addition to the standard stuff like speed and engine rpm, the SDL can even give a warning alarm for minimum and maximum velocity for cornering. Points are earned with Formula D's judges for maintaining a predefined entry speed, so this is a valuable asset for any pro looking to know exactly when they have reached the desired mark.

If a team can give its driver the perfect car, that driver will have the best chance of succeeding. So far, Falken's Ford Mustang has been just the tool to allow Pawlak to overcome competition from around the world and stand atop drifting's premiere stage.

“(The Falken Ford Mustang) has definitely changed my opinion of what a drift car should be,” Pawlak said when interviewed for this article. “It is by far the most competitive platform I've ever driven and I feel blessed to have the opportunity every event to get behind the wheel of it!”

Keep an eye out for Pawlak's ride at the head of the pack when the Formula Drift circuit heads your way in the future. With the support of his family and newborn son, there is no limit to where he could go.

Horsing Around: 2013 Ford Mustang GT RTR


Vehicle: 2013 Ford Mustang

Driver: Justin Pawlak

Team: Team Falken Tire

Built by: Autosport Dynamics

Engine: Ford Racing/Roush Yates 410 cu. in. V8

Horsepower: 845 hp @ 6,985 rpm

Torque: 632 lb-ft @ 5,185 rpm


Ford Racing 410 cu. in. V8 engine built by Roush Yates

Horsepower: 845 hp @ 6985 rpm

Torque: 632 ft-lb @ 5185 rpm

Rev limit: 8300 rpm

Peterson dry sump oil tank

MoTeC M800 ECU

Fuel Safe fuel cell


K&N Air Filters

Kinsler ITBs

Custom (cam shafts by ASD/RYRE, 4” exhaust by ASD)

Kooks headers

Rear-mounted Radiator by C&R (custom built by ASD)


Four-speed dog box manual transmission

Custom four-disc Tilton clutch for ASD

ASD-spec live rear axle with quick change gear sets


ASD Spec Tein Competition Dampers with in dash EDFC control unit,

Horsing Around: 2013 Ford Mustang GT RTR


HRE Competition Series C21 18” Wheels

Falken AZENIS RT-615K - Front 255/40R18, Rear 295/40R18

ASD Spec (Wilwood six-piston front brakes, Wilwood dual rear two-piston brakes)


ASD (Dry Carbon Body Panels, roof, fenders, doors, hood, trunk lid)

RTR (front chin spoiler, side skirts, rear trunk spoiler)

Ford OEM Mustang GT front and rear bumpers


Sparco (Pro 2000 race seats, racing harness, steering wheel)

MoTeC Sport Dash Logger (SDL) display

ASD (Dry Carbon instrument panel, roll cage)

Rear seat removed for weight


Falken Tire, Ford Racing, Brian Crower. Battery Tender, HRE Wheels, HPI Racing, ASD Motorsports, Wilwood, Mobil 1, Speedhunters, Sparco, RTR

Related Features

No Joke: Amper Kettutat's 2006 Nissan 350z

No joke. That might as well be the license plate for Amper Kettutat’s 350Z, although his choice for “WILD-Z” serves onlookers the details just as well. Sticker-bombed tires, yellow headlights, an authentic NISMO V2 body kit, Work Meister wheels and…
Read More


The last time I saw a Honda with a wall of four 15s was in 1998. Now who in their right mind would be insane enough to do something like that you say; it was yours truly. The look on…
Read More

History of Scion

The origins of the Scion brand came from parent company Toyota’s desire to capture a younger North American car-buying demographic. Toyota, a brand typically associated with a more mature crowd was mostly unable to the capture the attention of more…
Read More

Change-Up: Joon Maeng's S-Chassis Departure Aims for the Podium

Standing out on the Formula Drift grid with a V8-powered Nissan is tough. Although Joon Maeng's S13 was one of the most developed on the grid, he knew he needed something different to peak sponsor interest. After the 2014 season,…
Read More

KUHL Racing’s Custom Carved GT-R

KUHL Racing is known for their nutty paintjobs and over-the-top aggressive body stylings. Words by Micky Slinger. Photos by 7Tune KUHL’s GT86, which was shown off at last year’s Tokyo Auto Salon, sported a silver metallic paint with engraving from…
Read More