Drift Party: Matt Powers 1998 Nissan 240sx S14

After two years of amateur drifting and three years as a professional, Matt Powers decided his trusty old Nissan S14 was overdue to retire. Backed by video game giant Electronic Arts and its Need for Speed franchise, the car has served the California native well from his side skirt scraping amateur days in Oceanside to his first professional podium on the streets of Long Beach course. 

For 2012, Powers has taken all of the knowledge and experience from his previous car to build the new vehicle you see here. Starting off with a bone stock S14 that Powers purchased from a fellow drift enthusiast in Southern California, it didn't take long for Powers and his crew chief Costa Gialamas to strip it down to a shell at Costa's shop Gialamas Technical Innovations (GTI) in Costa Mesa.

Drift Party: Matt Powers 1998 Nissan 240sx S14Drift Party: Matt Powers 1998 Nissan 240sx S14

All OEM wiring, sound deadening, interior panels and the running gear have been removed to give the car a fresh slate. The factory seams have been skip welded to increase rigidity while a custom “Costa-spec” roll cage maximizes safety in the event of a side impact similar to the one Powers experienced in New Jersey last year. Gialamas carefully fit the main hoop as close to the factory sheet metal as possible to maximize safety and room in the driver compartment. With the cage installed, GP Motorsports did all of the wiring before the motor transplant got underway.

Drift Party: Matt Powers 1998 Nissan 240sx S14

The progression of professional drifting has seen instantaneous torque delivery become a requirement – a big reason V8 engines are becoming the majority for competition cars. The LS7 motor is the same powerplant from his previous car, though it has been refreshed for a new season of drifting and mounted with set of GTI engine mounts that keep the powerplant as low and as central to the car as possible. Stock output is upgraded with a Katech cam and valvetrain, Fast low profile LSX-R intake manifold and Hooker headers with the power being driven through an ACT clutch, G-force GSR four-speed transmission, Driveshaft Shop axles and a Winters quick change rear differential. Exhaust is handled by a custom setup boasting Burns stainless products while a Holley EFI controller takes care of engine managemen. The fuel system features a custom trunk-mounted fuel cell, Aeromotive fuel pump and regulator plus a pair of Fast fuel rails. A Mishimoto dual-pass race radiator, custom oil cooler and Earls stainless lines helps keep temperatures in the operating range. This setup is good for more than 520 horsepower and roughly 500 lb-ft of torque at the wheels

Drift Party: 1998 Nissan S14Drift Party: 1998 Nissan S14Drift Party: Matt Powers 1998 Nissan 240sx S14

Inside, the cabin is race car plain and simple. The dash is now a carbon fiber piece, which is completely empty minus the STACK instrument cluster and a few toggle buttons. The center console was removed and, outside of an enlarged transmission tunnel, switch panel and hydraulic e-brake, the middle of the car is quite bare. Sparco Corsa racing seats, steering wheel and safety belts replace the OEM units.

Drift Party: Matt Powers 1998 Nissan 240sx S14

Under the corners, the KW three-way adjustable motorsport coil-overs are custom-made to Powers' specifications to provide plenty of squat for forward bite and yet remain stiff for lateral grip. Powers specifically praises the KWs not only for their ease of adjustability and feedback with every adjustment, but also for the amazing track-side support as well. Paired with the coil-overs are Parts Shop Max control arms and suspension links to allow the team to dial in the camber while steering knuckles (also from Parts Shop Max) permit the incredible amount of steering angle necessary to keep the car from spinning out.

Powers is known for being one of the most stylish drivers on the circuit. His 2012 vehicle has been outfitted with aero parts by Rocket Bunny, including the front and rear bumpers, side skirts and fenders, while a Seibon carbon fiber hood, trunk and doors help keep the car as light as possible. The asymmetrical livery is designed by Need for Speed to be more simple than the leopard and zebra print he's used in years past and, although Powers has preferred vibrant-colored wheels in the past, this year's Motegi Trak Lite 18x9 wheels are a more neutral black color. The wheels are wrapped in Nitto NT05 tires.

Powers' new car has proven to be successful immediately in Formula D, earning a top four finish at the first event of the season in Long Beach. Powers is looking to improve on his sixth place overall finish in 2011, an effort that earned him the award for 'hardest charging' driver of the season as well as the 'most improved' from 2010. Currently sitting in the top 10 in championship points, Powers plans to finish the season strong and, hopefully, earn his first podium in the new chassis before the season is over.

Drift Party: Matt Powers 1998 Nissan 240sx S14

Vehicle: 1998 Nissan S14
Name: Matt Powers
Team: Deal With It
Built by: Gialamas Costa at Gialamas Technical Innovations (GTI)
Engine: Chevrolet LS7
Horsepower: 520 whp
Torque: 500 lb-ft

Mishimoto dual pass radiator
FAST LSX-R intake manifold and fuel rail
Holley EFI
Hooker headers
Aeromotive fuel pressure regulator
Earls stainless braided hoses
Katech torque cam and valvetrain
Dailey dry sump oil system
Royal Purple fluids

Burns stainless custom exhaust

G-force GSR four-speed transmission
ACT clutch
Driveshaft Shop axles

KW coil-overs with remote reservoirs
Parts Shop Max suspension links and knuckles

Seibon (carbon fiber hood, trunk, doors)
Rocket Bunny body kit

Motegi Trak Lite – 18x9, +5 (f/r)
Nitto NT05 tires
Wilwood four-piston brakes

GTI Roll Cage
Stack (DVL, multifunction dash, data logger) 
GP Motorsports wiring
Wilwood pedal box
Sparco (Corsa seats, harnesses, steering wheel)

Need for Speed, Nitto Tires, ACT, Mishimoto, Brian Crower, GTI, KW Suspension, Motegi, Parts Shop Max, Seibon Carbon, Holley EFI, Earls Hose, Stack, Alpinestars, Replay XD, Rocket Bunny, Royal Purple, Wilwood, Driveshaft Shop, Burns Stainless

More Vehicle Features

Stare Down: Marcus Prouty's 2003 Dodge Neon

Written by Mark Pereira | Photos By John Jackson The term ‘sport compact’ seems to conjure up images of custom Civics and Integras to many enthusiasts. But who says you need an H-badge on your ride to have fun? After…
Read More

Reinventing the Wheel: Carlos Molina's BMW E46 323i

In the years we've known Mr. Carlos Molina Jr. we've noted that he never stops moving forward. He is, in a word, a perpetual motion machine of automotive customization. He never rests on his laurels, and is never content to…
Read More

Pinky: Neal Woon-Fat's 1990 Nissan Skyline GT-R

The Canadian way of life has a few perks living in the great white north. First there is the low crime rate, excellent social services and of course free medical care. There are few natural disasters and the landscape is…
Read More

Juice Box

Since this particular Ford truck was made before any of the staff here was even born, we were somewhat amazed by what we were looking at. Anything pre-1970s and we are lost for words when asked about the history of…
Read More


The debates between FWD aficionados versus the world will never die. Sure some people jump camps but most Honda guys are front-drive for life. The AWD and RWD guys will mock the FWD but the FWD guys know with a…
Read More